Kyocera taskalfa 3501i driver download

Add Rule Click Add Rule button. Host Name: Enter the host name. If you use the host name, you must first specify the DNS server information. Port Number: Enter the port number from 1 to Path: Enter the path of the folder. Login User Name: Enter the login user name. Edit Rule Click the checkbox on the left of the Rule No. The Other - Property page opens. Click Check All button to select all the rules and click None button to deselect all the rules. Page 53 Function Settings This section includes the following items for configuration.

Copy Function You can activate or deactivate the Copy key on the machine. Sending Function You can activate or deactivate the Send key on the machine. Select an item from the drop-down list. Page Network Settings Network Settings 8 Network Settings This page is accessible when you have logged in the embedded server with administrator privilege, while network authentication or local authentication is enabled.

Use a semicolon ; between multiple addresses. Default Gateway Specifies the IP address of the default gateway. This function will require the presence of an RA Stateless router in the network that the device is connected to. Default Gateway Specifies the IPv6 address of the default gateway. Subnet Mask Specifies the subnet mask to be permitted. When there are no entries, access is allowed to all.

To allow access to a network, enter the network IPv4 address, and the subnet mask. An example of the data format for the. CSV file is: To permit access from all hosts on network , enter " Page 60 Network Settings Specifies the protocol by which an access is granted. The following protocols can be selected.

This section allows you to set access restrictions for IPSec protocol-based communication. Specifies whether or not to enable the IPSec protocol. Select On to use the IPv6 protocol.

If this field is blank, the specified addresses are considered to be host addresses. This improves the safety, but imposes a heavy burden because of more key-generation processes. Page 64 Network Settings between 1 to Typically, this should be To make advanced settings, click Settings button and select a certificate.

Click Submit button to finalize settings. Configure the device certificate on the Certificates page of Security Settings. Page 65 Network Settings Settings. Page 66 Network Settings To make advanced settings, click Settings button.

The status of this protocol is shown in IEEE This section includes the following items for configuration: IEEE Page Security Settings Security Settings 9 Security Settings This page is accessible when you have logged in the embedded server with administrator privilege, while network authentication or local authentication is enabled.

Click Device Security under Security Settings on the navigation menu. The Device Security Settings page opens. Page 69 Security Settings Sets the password policy. Password Policy: To set the password policy, set this to On and configure the following.

Maximum password age: Turn to On and select the valid period in the number of days from the drop-down list. Click Settings button to open the Password page.

Enter the password and click OK button to enable the data security function. Select On to use the Document Guard. Page 71 Security Settings This section includes the following items for configuration. SSL is a cryptographic protocol that provides communication security between a PC and the machine. To enable, select On.

Off deactivates the SSL protocol for com- munication. Serverside Settings Configures security settings on the server side. This section includes the following items for configuration: 1. Page Certificates Security Settings This section includes the following items for configuration.

Page 73 Security Settings Subject Displays the country code and common name. Expiration Displays the validity period of the certificate. This section includes the following items for configuration. Device Certificate 1 to 5 This sections allows you to modify the initial settings, add a new one, and delete the existing settings. Page Management Settings Management Settings 10 Management Settings This page is accessible when you have logged in the embedded server with administrator privilege, while network authentication or local authentication is enabled.

If needed, make the following settings for Paper 1 to 1. Paper 1 to 5 : To aggregate printed pages depending on the size, select On. Page Size: Select a paper size to aggregate the printed pages, from the drop- down list. FAX Counter Shows the total pages and times of sending faxes. Counter Reset Click Reset button to reset the counters. Click Other Account button or Total Account button to view the result accounting. Other Account The total number of copies accounted for other account is displayed.

Enter the domain name and click Submit button. If you have entered the several domain names, you can select it from the drop-down list. Configure the Network User Settings. Account Name From the drop-down list that is displayed by clicking Account List button, select an account name followed by Submit button.

E-mail Address Add a user's e-mail address. To enable sending e-mail, add your e-mail address. The e-mail address will be automatically selected whenever an e-mail notice is required by functionality. Password Authentication Select On to use the password authentication. Configure the ID Card Settings. Configure the FeliCa Settings. If an error occurs during transmission, Error Only allows a transmission result reported by e-mail and stored in the folder.

For Monthly, check the month and select a date and a time from the Day and Time drop-down lists, respectively. For Weekly, select a day of the week and a time from the Day and Time drop-down lists, respectively.

Recipient E-mail Address The E-mail address of the recipient of reports. If there are more than one recipient, then the addresses should be separated by a semicolon ;.

Subject Enter the subject for the Job Log History. Recipient E-mail Address The E-mail address of the recipient of logs. Subject Enter the subject for the Device Log History. If enabled On , an SNMP trap is generated when an attempt to read or write is made using an incorrect community name. The trap is sent to the configured trap address. After you have changed the setting, you must restart the printing system. The System Stamp Settings page opens.

To apply a character stamp to a print job, proceed as follow. Select On or Off and click Settings button. Font size: From the drop-down list, select Bold: Select either On or Off. Italic: Select either On or Off. Color: Select the color for the text from the drop-down list. Priority Show Determines whether the message board is prioritized to show. To apply the mes- sage board with priority, select On. Title You can enter the title of the message board. The Reset page opens.

Click Initialize button as needed. The machine is reset to the factory default. Embedded Web Server Page Troubleshooting Troubleshooting 11 Troubleshooting Consult the table below to find basic solutions for problems you may encounter with the embedded server. Characters do Does the version of Use a browser Page 93 Troubleshooting User Guide Page 94 Australia Pty. Page 96 This manual is also suitable for: Taskalfa i Taskalfa ci Taskalfa i Taskalfa ci Taskalfa i Taskalfa ci Print page 1 Print document 96 pages.

Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Yes, select Settings from the App Menu and then select Help.

There are several help sections that provide an overview of how to use the app. Click any title to open its corresponding topic. The app is compatible with any PC, laptop computer, or tablet that runs the Windows 8. The Windows device must support a minimum screen resolution of x pixels. You may also select a Workflow with preset scan options before connecting to the device.

If the connection is successful, the scan option fields will be activated and updated to reflect the capabilities of the selected scanner. Once connected, you can configure the scan settings for the target device and execute the scan. If the connection closes before you have finished configuring and executing the scan, continuing with Scan , Add , or Finish will fail.

You can scan multiple pages into a single document. To save each page of a multiple-page scan as a separate file, check the Save as separate files check box. By default, scanned documents are saved in the Pictures folder of your Windows device. After your scan is complete, the OCR Optical Character Recognition feature can extract words in a language of your choice. A text editing area allows you to make corrections with the aid of a spell checker.

Right-click or long tap a marked term to see suggested corrections. Scanning is only supported via network. Specifically, your PC must be on the same IPv4 network as the scan device. You can save scanned documents in. PDF, and. XPS formats. File names start with "kyoScan" and contain the approximate date and time the scan file was produced. When you connect to a printing device, the options that are supported by that device are displayed in the scan preferences pane on the Scan page.

Options that are not supported are grayed out or removed. You can have the app save the user name, password, and Account ID. Your information is kept secure through encryption. Network and local authentication is supported, while extended authentication is not.

Select the Auto Original size option in the app to allow for automatic detection of your document's size and orientation. For devices that don't support the Auto option, either use the Original orientation option or rotate the document by 90 degrees and ensure the original size matches the document's size. Try scanning again. Ensure you selected the correct language from the OCR list. Spell check is not available on certain system configurations. Select a workflow in the Workflows list to load its settings.

You can also Rename and Delete existing workflows with the exception of the Default workflow. Secure scanning with the app requires device settings that may not be required by other secure scanning solutions. Log on to your device's webpage Command Center as an administrator and ensure the following settings are correct:. For devices that require secure SSL connections, please import the device's certificate into your computer's Trusted Root Certification Authority store.

Please contact your system administrator for assistance. Scanning using the app may not be supported for some printers with scanners. Go to Hardware and operating system , then check if your printer is supported by the app. Note: A text-editing area appears. If the area shows a blank document, you may need to take a new capture. Some languages may not appear in the OCR language option.

For more information, go to the Microsoft website or contact your system administrator. From the main menu select the Library tile under Templates. The app shows several common paper sizes that are supported by most printers. To choose from the full assortment of paper sizes supported by your printer, please do the following:. Each discovered device is represented on the screen with a device tile.

There's been trouble communicating with the printer. It may be a network connectivity issue, the printer may be offline or busy, or the printer's reply may have been incomplete. Selecting a printer opens a simple print interface. Selecting More settings , below the default options, opens the advanced print settings pane. This advanced user interface, supported by some KYOCERA models, is designed to be touch friendly and allow access to settings not shown in the simple print interface.

The advanced settings depend upon the driver of the selected print device. Compatible print drivers may not be available, depending on your operating system and printer. For more information, refer to the documentation for your printer or print driver. You may continue to use the simple print interface in your app.

Check that your PC is connected to your local area network, and that the printing device is turned on and not in sleep mode. Change the display resolution when preview is cut off. This issue is known to occur in the x pixel resolution on the Surface 2 when scanning with original sizes of A3, 8K, and Ledger. Changing the device's resolution fixes the issue. The app is available for download from the Windows Store.